Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6122D326MR-G
عرض التفاصيل جداول البيانات

XC6122D326MR-G

Product Overview

Category

XC6122D326MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • High output voltage accuracy
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122D326MR-G is available in a small SOT-23-5 package.

Essence

The essence of XC6122D326MR-G lies in its ability to provide stable and regulated voltage to electronic devices.

Packaging/Quantity

It is typically packaged in reels, with each reel containing a specific quantity of XC6122D326MR-G units.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Output Current: 100mA (maximum)

Detailed Pin Configuration

XC6122D326MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection pin
  5. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient regulation even with low input voltages.
  • High output voltage accuracy provides precise voltage regulation.
  • Low quiescent current minimizes power consumption when the regulator is idle.
  • Overcurrent protection safeguards the circuit from excessive current flow.
  • Thermal shutdown protection prevents damage due to overheating.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Compact size
  • Low power consumption
  • Protection features enhance circuit safety

Disadvantages

  • Limited output current capacity (100mA maximum)
  • Restricted input voltage range (2.5V to 6.0V)

Working Principles

XC6122D326MR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6122D326MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122D326MR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6223B332MR-G

These models offer similar functionality and characteristics, providing options for different design requirements.

Note: The content provided above is approximately 350 words. Additional information may be required to reach the desired word count of 1100 words.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6122D326MR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6122D326MR-G in technical solutions:

  1. Question: What is XC6122D326MR-G?
    - Answer: XC6122D326MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122D326MR-G?
    - Answer: The operating voltage range of XC6122D326MR-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6122D326MR-G?
    - Answer: XC6122D326MR-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  4. Question: What is the typical quiescent current consumption of XC6122D326MR-G?
    - Answer: The typical quiescent current consumption of XC6122D326MR-G is around 1.0µA, making it suitable for low-power applications.

  5. Question: How accurate is XC6122D326MR-G in detecting voltage levels?
    - Answer: XC6122D326MR-G has a detection accuracy of ±1.5% at room temperature, ensuring reliable voltage monitoring.

  6. Question: Can XC6122D326MR-G be used for overvoltage protection?
    - Answer: No, XC6122D326MR-G is not designed for overvoltage protection. It is primarily used for voltage monitoring and detection purposes.

  7. Question: What is the reset delay time of XC6122D326MR-G?
    - Answer: The reset delay time of XC6122D326MR-G is typically 200ms, allowing sufficient time for the power supply to stabilize before triggering a reset.

  8. Question: Can XC6122D326MR-G be used in automotive applications?
    - Answer: Yes, XC6122D326MR-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  9. Question: What is the temperature range for XC6122D326MR-G operation?
    - Answer: XC6122D326MR-G can operate within a temperature range of -40°C to +85°C, making it suitable for various environmental conditions.

  10. Question: Is XC6122D326MR-G available in different package options?
    - Answer: Yes, XC6122D326MR-G is available in a SOT-25 package, which is a small surface-mount package commonly used in electronic devices.

Please note that these answers are based on general information about XC6122D326MR-G. It is always recommended to refer to the datasheet or consult with the manufacturer for specific technical details and application requirements.