Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6122E529MR-G
عرض التفاصيل جداول البيانات

XC6122E529MR-G

Product Overview

Category

XC6122E529MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High precision
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6122E529MR-G comes in a small surface-mount package.

Essence

The essence of XC6122E529MR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

The product is typically packaged in reels and the quantity per reel varies depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.9V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122E529MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6122E529MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down when the output current exceeds the specified limit, protecting the circuit from damage.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a shutdown mode to prevent overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • High precision ensures accurate voltage regulation.
  • Low power consumption helps conserve energy.
  • Wide input voltage range provides flexibility in various applications.
  • Overcurrent and thermal shutdown protection enhance circuit safety.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122E529MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.

Detailed Application Field Plans

XC6122E529MR-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122E529MR-G are: - XC6122 series: Offers different output voltage options - LM317: Adjustable voltage regulator with higher output current capability - LT1763: Low dropout voltage regulator with high precision

Note: This is not an exhaustive list, and there are several other alternative models available in the market.

Word count: 345 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6122E529MR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6122E529MR-G in technical solutions:

  1. Q: What is XC6122E529MR-G? A: XC6122E529MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Q: What is the operating voltage range of XC6122E529MR-G? A: The operating voltage range of XC6122E529MR-G is from 0.8V to 6.0V.

  3. Q: What is the output type of XC6122E529MR-G? A: XC6122E529MR-G has an open-drain output type, which means it can sink current but cannot source current.

  4. Q: How accurate is XC6122E529MR-G in detecting voltage levels? A: XC6122E529MR-G has a detection accuracy of ±1.5% at room temperature.

  5. Q: Can XC6122E529MR-G be used for overvoltage protection? A: No, XC6122E529MR-G is not designed for overvoltage protection. It is primarily used for undervoltage detection.

  6. Q: What is the quiescent current consumption of XC6122E529MR-G? A: The quiescent current consumption of XC6122E529MR-G is typically 1.0µA.

  7. Q: Does XC6122E529MR-G have a built-in hysteresis function? A: Yes, XC6122E529MR-G has a built-in hysteresis function to prevent oscillation caused by noise or voltage fluctuations.

  8. Q: Can XC6122E529MR-G be used in automotive applications? A: Yes, XC6122E529MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standard.

  9. Q: What is the temperature range of XC6122E529MR-G? A: XC6122E529MR-G has an operating temperature range of -40°C to +85°C.

  10. Q: How is XC6122E529MR-G typically packaged? A: XC6122E529MR-G is commonly available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.