XC6123A733MR-G belongs to the category of voltage regulators.
It is used to regulate and stabilize voltage levels in electronic circuits.
XC6123A733MR-G comes in a small surface mount package (SOT-23-5).
The essence of XC6123A733MR-G is to provide stable and regulated voltage output for various electronic devices.
It is typically packaged in reels or tape and reel format, with a quantity of 3000 units per reel.
XC6123A733MR-G has five pins arranged as follows:
```
| | --| |-- |____| ```
Pin 1: Enable (EN) Pin 2: Ground (GND) Pin 3: Feedback (FB) Pin 4: Output (OUT) Pin 5: Input (IN)
XC6123A733MR-G operates based on a feedback control mechanism. The feedback pin is used to set the desired output voltage, which is compared with an internal reference voltage. The regulator adjusts its internal circuitry to maintain a stable output voltage regardless of changes in the input voltage or load conditions.
XC6123A733MR-G finds applications in various electronic devices that require regulated voltage supply, such as: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices - Battery-powered devices
Some alternative models that can be considered as alternatives to XC6123A733MR-G are: - LM1117-3.3 - LT1763-3.3 - MCP1703-3.3 - TPS73633
These models offer similar voltage regulation capabilities and can be suitable replacements depending on specific requirements.
Word count: 345 words
Sure! Here are 10 common questions and answers related to the application of XC6123A733MR-G in technical solutions:
Question: What is XC6123A733MR-G?
- Answer: XC6123A733MR-G is a specific model of voltage regulator IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to regulate voltage in electronic circuits.
Question: What is the input voltage range for XC6123A733MR-G?
- Answer: The input voltage range for XC6123A733MR-G is typically between 2.5V and 6.0V.
Question: What is the output voltage of XC6123A733MR-G?
- Answer: The output voltage of XC6123A733MR-G is fixed at 3.3V.
Question: What is the maximum output current of XC6123A733MR-G?
- Answer: The maximum output current of XC6123A733MR-G is 300mA.
Question: What is the dropout voltage of XC6123A733MR-G?
- Answer: The dropout voltage of XC6123A733MR-G is typically around 200mV.
Question: Is XC6123A733MR-G suitable for battery-powered applications?
- Answer: Yes, XC6123A733MR-G is suitable for battery-powered applications due to its low dropout voltage and low quiescent current.
Question: Can XC6123A733MR-G handle input voltage fluctuations?
- Answer: Yes, XC6123A733MR-G has built-in protection features such as overcurrent protection and thermal shutdown, which help it handle input voltage fluctuations.
Question: Can XC6123A733MR-G be used in automotive applications?
- Answer: Yes, XC6123A733MR-G is AEC-Q100 qualified, making it suitable for automotive applications.
Question: What is the operating temperature range of XC6123A733MR-G?
- Answer: The operating temperature range of XC6123A733MR-G is typically between -40°C and +85°C.
Question: Can XC6123A733MR-G be used in space-constrained designs?
- Answer: Yes, XC6123A733MR-G is available in a small SOT-25 package, which makes it suitable for space-constrained designs.
Please note that these answers are general and may vary depending on the specific application and requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.