Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6123C217ER-G
عرض التفاصيل جداول البيانات

XC6123C217ER-G

Product Overview

Category

XC6123C217ER-G belongs to the category of electronic components.

Use

It is used in various electronic devices for voltage regulation and power management purposes.

Characteristics

  • Small form factor
  • High efficiency
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123C217ER-G is available in a compact surface-mount package.

Essence

The essence of XC6123C217ER-G lies in its ability to regulate voltage efficiently and reliably in electronic devices.

Packaging/Quantity

XC6123C217ER-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.17V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6123C217ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the device and connected components from excessive current flow.
  • Thermal shutdown protection: In case of overheating, the device automatically shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into small electronic devices.
  • High efficiency results in minimal power loss.
  • Wide input voltage range provides flexibility in various applications.
  • Overcurrent and thermal shutdown protection enhance device safety.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Lack of adjustable output voltage limits its versatility in certain scenarios.

Working Principles

XC6123C217ER-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It continuously monitors the input voltage and adjusts the internal circuit accordingly to maintain a stable output voltage.

Detailed Application Field Plans

XC6123C217ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

  1. XC6123C217MR-G: Similar specifications with minor variations in package type.
  2. XC6123C217NR-G: Higher output current variant with similar characteristics.
  3. XC6123C217LR-G: Lower dropout voltage variant for applications with stricter power requirements.

These alternative models provide options based on specific application needs while maintaining similar functionality.

Word count: 410 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6123C217ER-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6123C217ER-G in technical solutions:

  1. Question: What is XC6123C217ER-G?
    Answer: XC6123C217ER-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6123C217ER-G?
    Answer: The operating voltage range of XC6123C217ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6123C217ER-G help in technical solutions?
    Answer: XC6123C217ER-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper initialization and prevents data corruption or malfunctioning.

  4. Question: What is the output type of XC6123C217ER-G?
    Answer: XC6123C217ER-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.

  5. Question: What is the typical reset threshold voltage of XC6123C217ER-G?
    Answer: The typical reset threshold voltage of XC6123C217ER-G is 2.17V.

  6. Question: Can XC6123C217ER-G be used in battery-powered applications?
    Answer: Yes, XC6123C217ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.

  7. Question: Does XC6123C217ER-G have any built-in delay for the reset signal?
    Answer: Yes, XC6123C217ER-G has a built-in delay of typically 200ms to ensure stable power supply before releasing the reset signal.

  8. Question: What is the package type of XC6123C217ER-G?
    Answer: XC6123C217ER-G is available in a SOT-23-5 package, which is a small surface-mount package with five pins.

  9. Question: Can XC6123C217ER-G be used in automotive applications?
    Answer: Yes, XC6123C217ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  10. Question: Is XC6123C217ER-G RoHS compliant?
    Answer: Yes, XC6123C217ER-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.