Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6123C432ER-G
عرض التفاصيل جداول البيانات

XC6123C432ER-G

Product Overview

Category

XC6123C432ER-G belongs to the category of electronic components.

Use

It is used in various electronic devices and circuits for voltage regulation and power management purposes.

Characteristics

  • Small form factor
  • High efficiency
  • Low power consumption
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6123C432ER-G is available in a compact surface-mount package.

Essence

The essence of XC6123C432ER-G lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic systems.

Packaging/Quantity

XC6123C432ER-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.32V
  • Output Current: Up to 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123C432ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6123C432ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices from excessive current flow.
  • Thermal shutdown protection: In case of excessive temperature rise, the device shuts down to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into space-constrained designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range enables compatibility with various power sources.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low input voltage scenarios.

Working Principles

XC6123C432ER-G utilizes a voltage regulation circuit to maintain a constant output voltage. It employs feedback mechanisms to continuously monitor and adjust the output voltage based on the input voltage and load conditions.

Detailed Application Field Plans

XC6123C432ER-G finds applications in a wide range of electronic devices, including but not limited to: - Mobile phones - Portable media players - Wearable devices - IoT devices - Battery-powered systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123C432ER-G are: - XC6123C431ER-G: Similar specifications, but with a slightly lower output voltage of 4.31V. - XC6123C433ER-G: Similar specifications, but with a slightly higher output voltage of 4.33V. - XC6123C434ER-G: Similar specifications, but with a slightly higher output voltage of 4.34V.

These alternative models provide flexibility in choosing the desired output voltage for specific applications.

In conclusion, XC6123C432ER-G is a compact and efficient voltage regulator used in various electronic devices. Its stable output voltage, overcurrent protection, and thermal shutdown features make it a reliable choice for power management applications.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6123C432ER-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6123C432ER-G in technical solutions:

  1. Question: What is XC6123C432ER-G?
    Answer: XC6123C432ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6123C432ER-G?
    Answer: The operating voltage range of XC6123C432ER-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6123C432ER-G?
    Answer: XC6123C432ER-G has an open-drain output type, which means it can be connected to other devices or circuits with different voltage levels.

  4. Question: What is the typical quiescent current consumption of XC6123C432ER-G?
    Answer: The typical quiescent current consumption of XC6123C432ER-G is very low, around 1.0µA.

  5. Question: How does XC6123C432ER-G detect voltage levels?
    Answer: XC6123C432ER-G uses a built-in voltage reference and comparator to detect voltage levels. When the input voltage exceeds the threshold voltage, the output goes low.

  6. Question: Can XC6123C432ER-G be used for undervoltage and overvoltage detection?
    Answer: Yes, XC6123C432ER-G can be used for both undervoltage and overvoltage detection by setting the appropriate threshold voltage.

  7. Question: What is the accuracy of XC6123C432ER-G in voltage detection?
    Answer: The accuracy of XC6123C432ER-G is typically ±2.0% of the threshold voltage.

  8. Question: Can XC6123C432ER-G be used in automotive applications?
    Answer: Yes, XC6123C432ER-G is AEC-Q100 qualified and suitable for automotive applications.

  9. Question: What is the temperature range of XC6123C432ER-G?
    Answer: The temperature range of XC6123C432ER-G is from -40°C to +85°C.

  10. Question: How is XC6123C432ER-G packaged?
    Answer: XC6123C432ER-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.