Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6123C750MR-G
عرض التفاصيل جداول البيانات

XC6123C750MR-G

Product Overview

Category

XC6123C750MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: The XC6123C750MR-G comes in a small surface-mount package.
  • Essence: This voltage regulator provides stable and reliable voltage output.
  • Packaging/Quantity: It is typically packaged in reels or tubes, with a quantity of several hundred units per package.

Specifications

The specifications of XC6123C750MR-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 0.75V
  • Output Current: 300mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6123C750MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

The functional features of XC6123C750MR-G include:

  • Low dropout voltage: The regulator can maintain a stable output voltage even when the input voltage is close to the desired output voltage.
  • Low quiescent current: It consumes very little current when in standby mode, making it suitable for battery-powered applications.
  • Overcurrent protection: The device includes built-in protection against excessive current flow, ensuring the safety of the circuit.

Advantages and Disadvantages

Advantages: - Small package size allows for space-saving designs. - Wide input voltage range enables compatibility with various power sources. - Low quiescent current prolongs battery life in portable devices.

Disadvantages: - Limited output current may not be suitable for high-power applications. - Dropout voltage may cause a slight decrease in efficiency.

Working Principles

The XC6123C750MR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage, regardless of changes in the input voltage or load conditions.

Detailed Application Field Plans

XC6123C750MR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic gadgets - IoT (Internet of Things) devices - Wearable technology - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6123C750MR-G are: - LM1117-3.3: A popular voltage regulator with a fixed 3.3V output. - LT1763: A low dropout voltage regulator with adjustable output voltage. - MCP1700: A low quiescent current voltage regulator suitable for battery-powered applications.

These alternative models provide options for different output voltages, current capabilities, and additional features to meet specific design requirements.

Word count: 314 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6123C750MR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6123C750MR-G in technical solutions:

  1. Question: What is XC6123C750MR-G?
    - Answer: XC6123C750MR-G is a specific model of voltage regulator IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to regulate voltage in electronic circuits.

  2. Question: What is the input voltage range for XC6123C750MR-G?
    - Answer: The input voltage range for XC6123C750MR-G is typically between 2.5V and 6.0V.

  3. Question: What is the output voltage of XC6123C750MR-G?
    - Answer: The output voltage of XC6123C750MR-G is fixed at 3.3V.

  4. Question: What is the maximum output current of XC6123C750MR-G?
    - Answer: The maximum output current of XC6123C750MR-G is 750mA.

  5. Question: Can XC6123C750MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123C750MR-G can be used in battery-powered applications as it has a low dropout voltage and operates efficiently even with lower input voltages.

  6. Question: Is XC6123C750MR-G suitable for automotive applications?
    - Answer: Yes, XC6123C750MR-G is suitable for automotive applications as it meets the required automotive standards and has a wide operating temperature range.

  7. Question: Does XC6123C750MR-G have built-in protection features?
    - Answer: Yes, XC6123C750MR-G has built-in protection features such as overcurrent protection, thermal shutdown, and reverse current protection.

  8. Question: Can XC6123C750MR-G be used in space-constrained designs?
    - Answer: Yes, XC6123C750MR-G is available in a small SOT-25 package, making it suitable for space-constrained designs.

  9. Question: What are the typical applications of XC6123C750MR-G?
    - Answer: XC6123C750MR-G is commonly used in various electronic devices such as smartphones, tablets, portable audio players, and other battery-powered devices.

  10. Question: Are there any recommended external components to use with XC6123C750MR-G?
    - Answer: It is recommended to use input and output capacitors for stability and noise reduction. The specific values and types of capacitors can be found in the datasheet provided by Torex Semiconductor.

Please note that these answers are general and may vary depending on the specific requirements and design considerations of your technical solution.