XC6123D643MR-G
Product Overview
Category
XC6123D643MR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- Voltage regulation capability
- Compact size
- Low power consumption
- High efficiency
Package
XC6123D643MR-G comes in a small surface-mount package.
Essence
The essence of XC6123D643MR-G lies in its ability to provide stable and regulated voltage output.
Packaging/Quantity
This product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.5V
- Maximum Output Current: 150mA
- Dropout Voltage: 200mV (at 100mA)
- Quiescent Current: 30μA (typical)
Detailed Pin Configuration
XC6123D643MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- CE: Chip enable pin
Functional Features
- Voltage regulation: XC6123D643MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
- Thermal shutdown: The device shuts down automatically in case of excessive temperature to avoid overheating.
Advantages and Disadvantages
Advantages
- Small form factor allows for easy integration into compact electronic devices.
- Low power consumption helps conserve energy.
- High efficiency results in minimal power loss during voltage regulation.
Disadvantages
- Limited maximum output current may not be suitable for high-power applications.
- Dropout voltage may cause a slight voltage drop across the regulator.
Working Principles
XC6123D643MR-G operates on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage.
Detailed Application Field Plans
XC6123D643MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6123D643MR-G are: - XC6206P332MR-G - XC6220B332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6222B332MR-G
These models offer similar voltage regulation capabilities and package options, providing flexibility for different design requirements.
Word count: 331 words
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6123D643MR-G في الحلول التقنية
Sure! Here are 10 common questions and answers related to the application of XC6123D643MR-G in technical solutions:
Q: What is XC6123D643MR-G? A: XC6123D643MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6123D643MR-G? A: The operating voltage range of XC6123D643MR-G is from 0.6V to 6.0V.
Q: What is the output type of XC6123D643MR-G? A: XC6123D643MR-G has an open-drain output type, which means it can be connected to other devices or circuits to indicate the status of the monitored voltage.
Q: What is the typical quiescent current consumption of XC6123D643MR-G? A: The typical quiescent current consumption of XC6123D643MR-G is very low, usually around 1.0µA.
Q: Can XC6123D643MR-G be used for undervoltage detection? A: Yes, XC6123D643MR-G can be used for undervoltage detection. It has a built-in voltage reference and comparator that can detect when the monitored voltage drops below a certain threshold.
Q: How accurate is the voltage detection of XC6123D643MR-G? A: The voltage detection accuracy of XC6123D643MR-G is typically ±1.0%.
Q: Does XC6123D643MR-G have any built-in delay function? A: Yes, XC6123D643MR-G has a built-in delay function that can be configured to provide a delay time of up to several milliseconds. This delay helps prevent false triggering due to voltage fluctuations or noise.
Q: Can XC6123D643MR-G be used in battery-powered applications? A: Yes, XC6123D643MR-G is suitable for battery-powered applications as it has low quiescent current consumption and a wide operating voltage range.
Q: What is the temperature range in which XC6123D643MR-G can operate? A: XC6123D643MR-G can operate within a temperature range of -40°C to +85°C.
Q: Is XC6123D643MR-G available in different package options? A: Yes, XC6123D643MR-G is available in various package options, including SOT-25, SOT-89, and USP-6B.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements. It is always recommended to refer to the official documentation and consult with technical experts for accurate information.