XC6123D719MR-G
Product Overview
Category
XC6123D719MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Package: SOT-23-5
- Essence: Low dropout voltage regulator
- Packaging/Quantity: Tape and Reel, 3000 pieces per reel
Specifications
The specifications of XC6123D719MR-G are as follows:
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage Range: 1.8V to 5.0V
- Dropout Voltage: 200mV (typical)
- Output Current: 150mA (maximum)
- Quiescent Current: 30µA (typical)
- Line Regulation: ±0.05% (typical)
- Load Regulation: ±0.2% (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123D719MR-G has a total of five pins arranged as follows:
```
| | --| |-- |____| ```
Pin Configuration: 1. VIN: Input Voltage 2. GND: Ground 3. EN: Enable Pin 4. VOUT: Output Voltage 5. NC: No Connection
Functional Features
- Low dropout voltage
- Low quiescent current
- High output accuracy
- Short-circuit protection
- Thermal shutdown protection
Advantages and Disadvantages
Advantages: - Low dropout voltage ensures efficient power conversion. - Low quiescent current minimizes power consumption. - High output accuracy provides stable voltage regulation. - Short-circuit and thermal shutdown protection enhance reliability.
Disadvantages: - Limited maximum output current (150mA). - Narrow input voltage range (2.5V to 6.0V).
Working Principles
XC6123D719MR-G is a low dropout voltage regulator that regulates the output voltage by maintaining a constant voltage difference between the input and output. It achieves this by utilizing a pass transistor and feedback control mechanism. The enable pin allows for easy on/off control of the regulator.
Detailed Application Field Plans
XC6123D719MR-G finds applications in various electronic devices, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial equipment
Detailed and Complete Alternative Models
Some alternative models to XC6123D719MR-G are: - XC6123D718MR-G - XC6123D720MR-G - XC6123D721MR-G - XC6123D722MR-G - XC6123D723MR-G
These models offer similar functionality and characteristics, providing flexibility in choosing the most suitable voltage regulator for specific applications.
Word count: 346 words
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6123D719MR-G في الحلول التقنية
Sure! Here are 10 common questions and answers related to the application of XC6123D719MR-G in technical solutions:
Q: What is XC6123D719MR-G? A: XC6123D719MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when it falls below a certain threshold.
Q: What is the operating voltage range of XC6123D719MR-G? A: The operating voltage range of XC6123D719MR-G is typically between 0.8V and 6.0V.
Q: How does XC6123D719MR-G help in technical solutions? A: XC6123D719MR-G helps in technical solutions by providing a reliable way to monitor the power supply voltage and trigger actions or alarms when it goes out of the desired range.
Q: Can XC6123D719MR-G be used in battery-powered applications? A: Yes, XC6123D719MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q: What is the output type of XC6123D719MR-G? A: XC6123D719MR-G has an open-drain output type, which means it can be easily interfaced with other digital circuits.
Q: What is the typical accuracy of XC6123D719MR-G? A: The typical accuracy of XC6123D719MR-G is ±1.5% at room temperature.
Q: Can XC6123D719MR-G be used in automotive applications? A: Yes, XC6123D719MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: Does XC6123D719MR-G have built-in hysteresis? A: Yes, XC6123D719MR-G has a built-in hysteresis of typically 50mV, which helps to prevent oscillations near the threshold voltage.
Q: What is the package type of XC6123D719MR-G? A: XC6123D719MR-G is available in a small SOT-23-5 package, which is commonly used for compact electronic designs.
Q: Can XC6123D719MR-G be used in industrial applications? A: Yes, XC6123D719MR-G can be used in industrial applications as it has a wide operating temperature range of -40°C to +105°C and is resistant to electromagnetic interference (EMI).
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.