قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6123E716MR-G

XC6123E716MR-G

Product Overview

Category

XC6123E716MR-G belongs to the category of voltage regulators.

Use

It is commonly used for voltage regulation in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

XC6123E716MR-G is available in a small surface-mount package.

Essence

The essence of XC6123E716MR-G lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

XC6123E716MR-G is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Output Current: 200mA (max)
  • Dropout Voltage: 150mV (typ)
  • Quiescent Current: 30µA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6123E716MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: XC6123E716MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal shutdown: In case of excessive temperature, the regulator shuts down to prevent damage.
  • Low quiescent current: The low quiescent current minimizes power consumption.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact designs.
  • Wide input voltage range provides flexibility in various applications.
  • High efficiency ensures minimal power loss.
  • Overcurrent protection enhances the safety of connected devices.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage may affect performance in low-input voltage scenarios.

Working Principles

XC6123E716MR-G operates based on a feedback control mechanism. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This is achieved through the use of a voltage reference, error amplifier, and pass transistor.

Detailed Application Field Plans

XC6123E716MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6123E716MR-G are: - XC6206P332MR - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6123E716MR-G is a voltage regulator with compact size, wide input voltage range, and high efficiency. It provides stable voltage regulation for various electronic devices. However, its limited output current and dropout voltage should be taken into consideration when selecting it for specific applications.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6123E716MR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6123E716MR-G in technical solutions:

  1. Question: What is XC6123E716MR-G?
    - Answer: XC6123E716MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various technical solutions.

  2. Question: What is the operating voltage range of XC6123E716MR-G?
    - Answer: The operating voltage range of XC6123E716MR-G is from 0.7V to 6.0V.

  3. Question: What is the output type of XC6123E716MR-G?
    - Answer: XC6123E716MR-G has an open-drain output type.

  4. Question: What is the typical quiescent current consumption of XC6123E716MR-G?
    - Answer: The typical quiescent current consumption of XC6123E716MR-G is 1.0µA.

  5. Question: What is the detection voltage accuracy of XC6123E716MR-G?
    - Answer: The detection voltage accuracy of XC6123E716MR-G is ±1.0%.

  6. Question: Can XC6123E716MR-G be used for overvoltage protection?
    - Answer: No, XC6123E716MR-G is not designed for overvoltage protection. It is primarily used as a voltage detector.

  7. Question: What is the temperature range for operation of XC6123E716MR-G?
    - Answer: XC6123E716MR-G can operate within a temperature range of -40°C to +85°C.

  8. Question: Does XC6123E716MR-G have a built-in delay circuit?
    - Answer: Yes, XC6123E716MR-G has a built-in delay circuit with a typical delay time of 200ms.

  9. Question: Can XC6123E716MR-G be used in battery-powered applications?
    - Answer: Yes, XC6123E716MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  10. Question: What is the package type of XC6123E716MR-G?
    - Answer: XC6123E716MR-G is available in a SOT-23-5 package.

Please note that these answers are general and may vary depending on the specific application and requirements.