Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6124A321ER-G
عرض التفاصيل جداول البيانات

XC6124A321ER-G

Product Overview

Category

XC6124A321ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • Low power consumption
  • High precision voltage regulation
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124A321ER-G is available in a compact SOT-23-5 package.

Essence

The essence of XC6124A321ER-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

The product is typically packaged in reels, with each reel containing a specific quantity of XC6124A321ER-G units.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.0V
  • Output Current: 150mA (maximum)
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A321ER-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. NC (No Connection)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6124A321ER-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down if the output current exceeds the maximum limit.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size and lightweight make it suitable for space-constrained applications.
  • Low power consumption helps in energy-efficient designs.
  • High precision voltage regulation ensures reliable performance.
  • Wide input voltage range allows compatibility with various power sources.

Disadvantages

  • Limited output current may not be sufficient for high-power applications.
  • Dropout voltage can cause a slight voltage drop across the regulator.

Working Principles

XC6124A321ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

XC6124A321ER-G finds applications in various electronic devices, including but not limited to: - Portable consumer electronics - Battery-powered devices - IoT devices - Wearable devices - Automotive electronics - Industrial equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6124A321ER-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These alternatives can be considered based on specific requirements and availability.

Word count: 343 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6124A321ER-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6124A321ER-G in technical solutions:

  1. Question: What is the purpose of XC6124A321ER-G in technical solutions?
    Answer: XC6124A321ER-G is a voltage detector IC that monitors the power supply voltage and provides a reset signal to the microcontroller or other devices when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6124A321ER-G?
    Answer: The operating voltage range of XC6124A321ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124A321ER-G help in preventing data corruption during power supply fluctuations?
    Answer: XC6124A321ER-G detects low voltage conditions and generates a reset signal, allowing the microcontroller or other devices to perform a controlled shutdown or save critical data before the power supply drops below a safe level.

  4. Question: Can XC6124A321ER-G be used in battery-powered applications?
    Answer: Yes, XC6124A321ER-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Question: What is the typical reset voltage threshold of XC6124A321ER-G?
    Answer: The typical reset voltage threshold of XC6124A321ER-G is 3.2V.

  6. Question: Does XC6124A321ER-G have any built-in delay time for the reset signal?
    Answer: Yes, XC6124A321ER-G has a built-in delay time of approximately 200ms to ensure stable operation during power supply fluctuations.

  7. Question: Can XC6124A321ER-G be used in automotive applications?
    Answer: Yes, XC6124A321ER-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Question: What is the package type of XC6124A321ER-G?
    Answer: XC6124A321ER-G is available in a SOT-23-5 package.

  9. Question: Can XC6124A321ER-G be used in industrial control systems?
    Answer: Yes, XC6124A321ER-G can be used in industrial control systems to ensure reliable operation and protect against power supply fluctuations.

  10. Question: Is XC6124A321ER-G compatible with microcontrollers from different manufacturers?
    Answer: Yes, XC6124A321ER-G is compatible with most microcontrollers as it provides a standard reset signal that can be easily integrated into various system designs.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.