Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6124A532MR-G
عرض التفاصيل جداول البيانات

XC6124A532MR-G

Product Overview

Category

XC6124A532MR-G belongs to the category of voltage regulators.

Use

This product is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • Wide input voltage range

Package

XC6124A532MR-G is available in a small surface-mount package.

Essence

The essence of this product lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

XC6124A532MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • Low power consumption
  • Built-in protection features

Disadvantages

  • Limited output current capacity
  • Not suitable for high-power applications

Working Principles

XC6124A532MR-G operates by regulating the input voltage to maintain a constant output voltage of 3.3V. It achieves this through internal circuitry that adjusts the voltage based on the feedback received from the output.

Detailed Application Field Plans

XC6124A532MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Consumer electronics

Detailed and Complete Alternative Models

  1. XC6124B532MR-G: Similar specifications with a different output voltage of 5V.
  2. XC6124C532MR-G: Similar specifications with a different output voltage of 3.0V.
  3. XC6124D532MR-G: Similar specifications with a different output voltage of 2.8V.

These alternative models provide flexibility for different voltage requirements while maintaining similar characteristics and features.

Word count: 305 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6124A532MR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6124A532MR-G in technical solutions:

  1. Question: What is XC6124A532MR-G?
    - Answer: XC6124A532MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124A532MR-G?
    - Answer: The operating voltage range of XC6124A532MR-G is from 0.8V to 6.0V.

  3. Question: How does XC6124A532MR-G work?
    - Answer: XC6124A532MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.

  4. Question: What is the typical quiescent current consumption of XC6124A532MR-G?
    - Answer: The typical quiescent current consumption of XC6124A532MR-G is very low, typically around 1.0µA.

  5. Question: Can XC6124A532MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124A532MR-G is suitable for battery-powered applications due to its low quiescent current consumption, which helps conserve battery life.

  6. Question: What is the output configuration of XC6124A532MR-G?
    - Answer: XC6124A532MR-G has an open-drain output configuration, allowing it to be easily connected to other devices or microcontrollers.

  7. Question: What is the accuracy of the voltage detection threshold in XC6124A532MR-G?
    - Answer: The accuracy of the voltage detection threshold in XC6124A532MR-G is typically ±1.5%.

  8. Question: Can XC6124A532MR-G be used for overvoltage protection?
    - Answer: No, XC6124A532MR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  9. Question: What is the temperature range of operation for XC6124A532MR-G?
    - Answer: XC6124A532MR-G has an operating temperature range of -40°C to +85°C.

  10. Question: Is XC6124A532MR-G RoHS compliant?
    - Answer: Yes, XC6124A532MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.