قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6124A734MR-G

XC6124A734MR-G

Product Overview

Category

XC6124A734MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124A734MR-G is available in a small surface-mount package.

Essence

The essence of XC6124A734MR-G lies in its ability to regulate voltage efficiently and reliably in various electronic applications.

Packaging/Quantity

XC6124A734MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Dropout Voltage: 200mV (typical)
  • Maximum Output Current: 150mA
  • Quiescent Current: 25μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A734MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6124A734MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It safeguards the circuit by limiting the output current to prevent damage.
  • Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for space-saving designs.
  • High efficiency results in minimal power loss.
  • Wide input voltage range enables compatibility with various power sources.
  • Overcurrent and thermal protection enhance circuit reliability.

Disadvantages

  • Limited maximum output current may restrict usage in high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6124A734MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage, compensating for input voltage variations.

Detailed Application Field Plans

XC6124A734MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124A734MR-G are: - LM1117-3.3 - MCP1700-3302E/TO - TS2937CP-3.3

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6124A734MR-G is a compact and efficient voltage regulator suitable for a wide range of electronic applications. Its features, advantages, and limitations make it a reliable choice for designers seeking stable voltage regulation in their circuits.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6124A734MR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6124A734MR-G in technical solutions:

  1. Question: What is XC6124A734MR-G?
    - Answer: XC6124A734MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the voltage level and provide a reset signal when the voltage drops below a specified threshold.

  2. Question: What is the operating voltage range of XC6124A734MR-G?
    - Answer: The operating voltage range of XC6124A734MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124A734MR-G work?
    - Answer: XC6124A734MR-G continuously monitors the input voltage and compares it with a reference voltage. When the input voltage falls below the reference voltage, it generates a reset signal to indicate a power failure or low voltage condition.

  4. Question: What is the output type of XC6124A734MR-G?
    - Answer: XC6124A734MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Question: What is the typical reset threshold voltage of XC6124A734MR-G?
    - Answer: The typical reset threshold voltage of XC6124A734MR-G is 2.9V.

  6. Question: Can XC6124A734MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124A734MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  7. Question: Is XC6124A734MR-G suitable for automotive applications?
    - Answer: Yes, XC6124A734MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  8. Question: Can XC6124A734MR-G be used in industrial control systems?
    - Answer: Yes, XC6124A734MR-G can be used in industrial control systems as it has a wide operating temperature range of -40°C to +105°C.

  9. Question: Does XC6124A734MR-G have any built-in delay time?
    - Answer: No, XC6124A734MR-G does not have any built-in delay time. The reset signal is generated immediately when the voltage falls below the threshold.

  10. Question: What is the package type of XC6124A734MR-G?
    - Answer: XC6124A734MR-G is available in a SOT-25 package, which is a small surface-mount package with three leads.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.