قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6124C425ER-G

XC6124C425ER-G

Product Overview

Category

XC6124C425ER-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High precision
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124C425ER-G is available in a small SOT-23-5 package.

Essence

The essence of XC6124C425ER-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

It is typically packaged in reels, with 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 4.25V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Line Regulation: ±0.1% (typical)
  • Load Regulation: ±0.3% (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124C425ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection
  5. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Reverse current protection
  • Short-circuit protection
  • Fast transient response

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • High precision regulation
  • Low power consumption
  • Built-in protection features

Disadvantages

  • Limited output current capacity (150mA)
  • Sensitive to excessive heat

Working Principles

XC6124C425ER-G operates by comparing the output voltage with a reference voltage. It adjusts the resistance in the feedback loop to maintain a stable output voltage, compensating for changes in input voltage and load conditions.

Detailed Application Field Plans

XC6124C425ER-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C425ER-G are: - LM1117-3.3 - MCP1700-3302E/TO - TPS79333DBVR - LP2985-33DBVR - AP2112K-3.3TRG1

These models offer similar functionality and specifications, providing options for different design requirements.

In conclusion, XC6124C425ER-G is a compact voltage regulator with high precision and various built-in protection features. Its wide input voltage range and small form factor make it suitable for a wide range of electronic devices. However, its limited output current capacity and sensitivity to heat should be taken into consideration during design.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6124C425ER-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6124C425ER-G in technical solutions:

  1. Question: What is XC6124C425ER-G?
    - Answer: XC6124C425ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is designed to monitor the power supply voltage and provide a reset signal when the voltage drops below a certain threshold.

  2. Question: What is the operating voltage range of XC6124C425ER-G?
    - Answer: The operating voltage range of XC6124C425ER-G is from 0.8V to 6.0V.

  3. Question: What is the typical reset voltage of XC6124C425ER-G?
    - Answer: The typical reset voltage of XC6124C425ER-G is 4.25V.

  4. Question: How does XC6124C425ER-G detect the voltage level?
    - Answer: XC6124C425ER-G uses an internal voltage reference and a comparator to monitor the input voltage level.

  5. Question: Can XC6124C425ER-G be used in battery-powered applications?
    - Answer: Yes, XC6124C425ER-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: What is the output type of XC6124C425ER-G?
    - Answer: XC6124C425ER-G has an open-drain output, which means it can be connected to other devices with different voltage levels.

  7. Question: Does XC6124C425ER-G have any built-in delay for the reset signal?
    - Answer: No, XC6124C425ER-G does not have any built-in delay. The reset signal is generated as soon as the voltage drops below the threshold.

  8. Question: Can XC6124C425ER-G be used in automotive applications?
    - Answer: Yes, XC6124C425ER-G is AEC-Q100 qualified and can be used in automotive applications.

  9. Question: What is the package type of XC6124C425ER-G?
    - Answer: XC6124C425ER-G is available in a SOT-25 package.

  10. Question: Are there any additional features or protections provided by XC6124C425ER-G?
    - Answer: Yes, XC6124C425ER-G has built-in overcurrent protection and thermal shutdown features to ensure safe operation.

Please note that these answers are based on general information about XC6124C425ER-G and may vary depending on specific application requirements.