Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6124C548MR-G
عرض التفاصيل جداول البيانات

XC6124C548MR-G

Product Overview

Category

XC6124C548MR-G belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • Low power consumption

Package

XC6124C548MR-G is available in a small form factor package, typically a surface mount device (SMD) package.

Essence

The essence of XC6124C548MR-G lies in its ability to regulate voltage and manage power efficiently in electronic devices.

Packaging/Quantity

This product is usually packaged in reels or tape and reel packaging. The quantity per reel may vary depending on the manufacturer.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Maximum Output Current: 150mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The XC6124C548MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. EN: Enable pin (optional)

Functional Features

  • Voltage regulation: The XC6124C548MR-G ensures a stable output voltage within the specified range.
  • Power management: It efficiently manages power consumption, reducing energy waste.
  • Enable pin: The optional enable pin allows for control of the device's operation.

Advantages and Disadvantages

Advantages

  • Compact size makes it suitable for space-constrained applications.
  • Low power consumption helps prolong battery life in portable devices.
  • Wide input and output voltage ranges provide flexibility in various applications.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect the efficiency in low voltage scenarios.

Working Principles

The XC6124C548MR-G utilizes internal circuitry to regulate the input voltage and provide a stable output voltage. It employs various techniques, such as feedback control and voltage reference, to ensure accurate regulation.

Detailed Application Field Plans

XC6124C548MR-G finds applications in a wide range of electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124C548MR-G are: - XC6124C548MR-G-ND - XC6124C548MR-G-F - XC6124C548MR-G-H

These models offer similar functionality and characteristics, providing options for different design requirements.

Note: The content provided above is approximately 350 words. Additional information or details can be added to meet the required word count of 1100 words.

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6124C548MR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6124C548MR-G in technical solutions:

  1. Question: What is XC6124C548MR-G?
    - Answer: XC6124C548MR-G is a specific model of voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used for monitoring the voltage level in electronic circuits.

  2. Question: What is the operating voltage range of XC6124C548MR-G?
    - Answer: The operating voltage range of XC6124C548MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124C548MR-G work?
    - Answer: XC6124C548MR-G works by continuously monitoring the input voltage and comparing it to a preset threshold. When the input voltage falls below the threshold, an internal reset signal is generated.

  4. Question: What is the purpose of using XC6124C548MR-G in technical solutions?
    - Answer: XC6124C548MR-G is commonly used as a voltage supervisor or reset generator in various applications, such as microcontrollers, DSPs, FPGAs, and other digital systems.

  5. Question: Can XC6124C548MR-G be used in battery-powered devices?
    - Answer: Yes, XC6124C548MR-G can be used in battery-powered devices as it has a low quiescent current consumption, making it suitable for power-sensitive applications.

  6. Question: Does XC6124C548MR-G have any built-in delay function?
    - Answer: Yes, XC6124C548MR-G has a built-in fixed delay time of approximately 200ms to prevent false resets due to voltage fluctuations or noise.

  7. Question: What is the output type of XC6124C548MR-G?
    - Answer: XC6124C548MR-G has an open-drain output, which means it can be connected to other devices with different voltage levels.

  8. Question: Can XC6124C548MR-G tolerate reverse polarity?
    - Answer: No, XC6124C548MR-G is not designed to tolerate reverse polarity. It should be connected with the correct polarity to avoid damage.

  9. Question: Is XC6124C548MR-G suitable for automotive applications?
    - Answer: Yes, XC6124C548MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  10. Question: What are the package options available for XC6124C548MR-G?
    - Answer: XC6124C548MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of XC6124C548MR-G.