XC6124C639ER-G
Product Overview
Category
The XC6124C639ER-G belongs to the category of voltage regulators.
Use
It is used to regulate voltage in electronic circuits, ensuring a stable and constant output voltage.
Characteristics
- Low dropout voltage
- Low quiescent current
- High ripple rejection ratio
- Built-in overcurrent protection
- Small package size
Package
The XC6124C639ER-G comes in a small surface-mount package.
Essence
The essence of this product lies in its ability to provide stable voltage regulation in a compact form factor.
Packaging/Quantity
The product is typically supplied in reels or tubes, with quantities varying based on manufacturer specifications.
Specifications
- Input Voltage Range: 2.5V to 6.0V
- Output Voltage: 3.3V
- Maximum Output Current: 150mA
- Dropout Voltage: 160mV @ 100mA
- Quiescent Current: 30μA (typical)
- Ripple Rejection Ratio: 70dB @ 1kHz
- Operating Temperature Range: -40°C to 85°C
Detailed Pin Configuration
The XC6124C639ER-G has a standard 5-pin SOT-23 package with the following pin configuration: 1. VIN (Input Voltage) 2. GND (Ground) 3. NC (No Connection) 4. VOUT (Output Voltage) 5. EN (Enable)
Functional Features
- Overcurrent Protection: The device includes built-in overcurrent protection to safeguard the circuit from excessive currents.
- Low Dropout Voltage: The low dropout voltage ensures efficient regulation even when the input voltage is close to the output voltage.
- Low Quiescent Current: The low quiescent current minimizes power consumption in standby or idle modes.
Advantages and Disadvantages
Advantages
- Small package size
- Low dropout voltage
- Built-in overcurrent protection
- Low quiescent current
Disadvantages
- Limited maximum output current (150mA)
- Restricted input voltage range (2.5V to 6.0V)
Working Principles
The XC6124C639ER-G operates by comparing the output voltage to a reference voltage and adjusting the pass element to maintain a constant output voltage, compensating for changes in input voltage and load conditions.
Detailed Application Field Plans
The XC6124C639ER-G is suitable for various applications including: - Battery-powered devices - Portable electronics - IoT devices - Wearable technology - Sensor modules
Detailed and Complete Alternative Models
Some alternative models to the XC6124C639ER-G include: - XC6206P332MR-G - XC6221B331MR-G - XC6210B332MR-G - XC6221B331MR-G
In conclusion, the XC6124C639ER-G voltage regulator offers a compact and efficient solution for stabilizing voltage in a wide range of electronic applications, making it an essential component in modern electronic designs.
[Word Count: 443]
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6124C639ER-G في الحلول التقنية
What is the input voltage range for XC6124C639ER-G?
- The input voltage range for XC6124C639ER-G is 2.5V to 6.0V.
What is the typical output current of XC6124C639ER-G?
- The typical output current of XC6124C639ER-G is 150mA.
What is the dropout voltage of XC6124C639ER-G?
- The dropout voltage of XC6124C639ER-G is typically 250mV at 100mA.
What is the quiescent current of XC6124C639ER-G?
- The quiescent current of XC6124C639ER-G is typically 75μA.
What is the operating temperature range of XC6124C639ER-G?
- The operating temperature range of XC6124C639ER-G is -40°C to 85°C.
Does XC6124C639ER-G have built-in overcurrent protection?
- Yes, XC6124C639ER-G has built-in overcurrent protection.
Can XC6124C639ER-G be used in battery-powered applications?
- Yes, XC6124C639ER-G can be used in battery-powered applications due to its low quiescent current.
Is XC6124C639ER-G suitable for space-constrained designs?
- Yes, XC6124C639ER-G is suitable for space-constrained designs due to its small package size.
What are the typical applications for XC6124C639ER-G?
- Typical applications for XC6124C639ER-G include portable devices, IoT devices, and battery-powered equipment.
Does XC6124C639ER-G require external capacitors for stability?
- No, XC6124C639ER-G does not require external capacitors for stability, which simplifies the design process.