XC6124D434MR-G
Product Overview
Category
XC6124D434MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Small size and low profile package
- High accuracy and efficiency
- Low dropout voltage
- Overcurrent protection
- Thermal shutdown protection
Package
XC6124D434MR-G is available in a small SOT-25 package.
Essence
The essence of XC6124D434MR-G is to provide stable and regulated voltage output for electronic devices.
Packaging/Quantity
It is typically packaged in reels, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 4.34V
- Dropout Voltage: 200mV (typical)
- Output Current: 150mA (maximum)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6124D434MR-G has three pins:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6124D434MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It safeguards the circuit by limiting the output current to prevent damage.
- Thermal shutdown protection: In case of excessive temperature, the regulator shuts down to avoid overheating.
Advantages and Disadvantages
Advantages
- Small size and low profile package make it suitable for space-constrained applications.
- High accuracy and efficiency ensure reliable voltage regulation.
- Low dropout voltage minimizes power loss.
- Overcurrent and thermal shutdown protection enhance circuit safety.
Disadvantages
- Limited output current of 150mA may not be sufficient for high-power applications.
- Operating temperature range of -40°C to +85°C may restrict usage in extreme environments.
Working Principles
XC6124D434MR-G utilizes a voltage reference, error amplifier, and pass transistor to regulate the output voltage. The voltage reference compares the output voltage with a fixed reference, and the error amplifier adjusts the pass transistor accordingly to maintain a constant output voltage.
Detailed Application Field Plans
XC6124D434MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124D434MR-G are: - XC6124C434MR-G: Similar specifications but with a different package. - XC6124D433MR-G: Lower output voltage variant. - XC6124D435MR-G: Higher output voltage variant.
These alternative models provide flexibility in choosing the appropriate voltage regulator based on specific requirements.
Word count: 411 words
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6124D434MR-G في الحلول التقنية
Sure! Here are 10 common questions and answers related to the application of XC6124D434MR-G in technical solutions:
Q: What is XC6124D434MR-G? A: XC6124D434MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage crosses a certain threshold.
Q: What is the operating voltage range of XC6124D434MR-G? A: The operating voltage range of XC6124D434MR-G is typically between 0.8V and 6.0V.
Q: How does XC6124D434MR-G work? A: XC6124D434MR-G works by comparing the input voltage with a reference voltage internally set within the IC. When the input voltage exceeds or falls below the reference voltage, it triggers the output signal.
Q: What is the output type of XC6124D434MR-G? A: XC6124D434MR-G has an open-drain output type, which means it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.
Q: What is the typical quiescent current consumption of XC6124D434MR-G? A: The typical quiescent current consumption of XC6124D434MR-G is very low, usually around 1.0µA.
Q: Can XC6124D434MR-G be used for overvoltage protection? A: No, XC6124D434MR-G is not designed for overvoltage protection. It is primarily used for voltage monitoring and detection purposes.
Q: What is the typical voltage threshold accuracy of XC6124D434MR-G? A: The typical voltage threshold accuracy of XC6124D434MR-G is ±1.5%.
Q: Can XC6124D434MR-G be used in battery-powered applications? A: Yes, XC6124D434MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.
Q: What is the temperature range of operation for XC6124D434MR-G? A: XC6124D434MR-G has an operating temperature range of -40°C to +85°C.
Q: Is XC6124D434MR-G RoHS compliant? A: Yes, XC6124D434MR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications.