Torex Semiconductor Ltd
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
XC6124D531MR-G
عرض التفاصيل جداول البيانات

XC6124D531MR-G

Product Overview

Category

XC6124D531MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Package: SOT-23-5
  • Essence: Voltage regulator
  • Packaging/Quantity: Tape and reel, 3000 pieces per reel

Specifications

The specifications of XC6124D531MR-G are as follows:

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA (maximum)
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)

Detailed Pin Configuration

XC6124D531MR-G has a total of five pins. The pin configuration is as follows:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection pin
  5. VOUT: Output voltage pin

Functional Features

XC6124D531MR-G offers the following functional features:

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit protection
  • Overcurrent protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient regulation - Low quiescent current minimizes power consumption - Thermal shutdown protection prevents overheating - Short-circuit and overcurrent protection enhance circuit safety

Disadvantages: - Limited output current capacity (150mA maximum)

Working Principles

XC6124D531MR-G works by regulating the input voltage to maintain a stable output voltage of 3.3V. It achieves this through internal circuitry that adjusts the voltage based on the feedback received from the output.

Detailed Application Field Plans

XC6124D531MR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124D531MR-G are: - XC6206P332MR-G - XC6220B331MR-G - XC6219B331MR-G - XC6221B331MR-G - XC6223B331MR-G

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 270 words

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6124D531MR-G في الحلول التقنية

Sure! Here are 10 common questions and answers related to the application of XC6124D531MR-G in technical solutions:

  1. Question: What is XC6124D531MR-G?
    Answer: XC6124D531MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used in various technical solutions.

  2. Question: What is the purpose of XC6124D531MR-G?
    Answer: The purpose of XC6124D531MR-G is to monitor the voltage level of a power supply and provide an output signal when the voltage falls below or exceeds a certain threshold.

  3. Question: What is the operating voltage range of XC6124D531MR-G?
    Answer: XC6124D531MR-G operates within a voltage range of 0.8V to 6.0V.

  4. Question: How does XC6124D531MR-G detect voltage levels?
    Answer: XC6124D531MR-G uses an internal voltage reference and a comparator to compare the input voltage with a preset threshold.

  5. Question: Can XC6124D531MR-G be used in battery-powered applications?
    Answer: Yes, XC6124D531MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0μA.

  6. Question: What is the output configuration of XC6124D531MR-G?
    Answer: XC6124D531MR-G has an open-drain output configuration, which allows for easy integration with other devices.

  7. Question: What is the typical accuracy of XC6124D531MR-G?
    Answer: The typical accuracy of XC6124D531MR-G is ±1.0%.

  8. Question: Can XC6124D531MR-G be used in automotive applications?
    Answer: Yes, XC6124D531MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  9. Question: Does XC6124D531MR-G have built-in hysteresis?
    Answer: Yes, XC6124D531MR-G has a built-in hysteresis of typically 10% to prevent oscillation near the threshold voltage.

  10. Question: What package does XC6124D531MR-G come in?
    Answer: XC6124D531MR-G is available in a small SOT-25 package, which makes it suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific requirements and datasheet of XC6124D531MR-G.