XC6124E743MR-G
Product Overview
Category
XC6124E743MR-G belongs to the category of voltage regulators.
Use
It is commonly used for regulating voltage in electronic circuits.
Characteristics
- Compact size
- High efficiency
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Package
XC6124E743MR-G is available in a small surface-mount package.
Essence
The essence of XC6124E743MR-G lies in its ability to provide stable and regulated voltage to electronic devices.
Packaging/Quantity
It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.0V
- Dropout Voltage: 200mV (typical)
- Maximum Output Current: 150mA
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6124E743MR-G has the following pin configuration:
- VIN (Input Voltage)
- GND (Ground)
- VOUT (Output Voltage)
Functional Features
- Voltage regulation
- Overcurrent protection
- Thermal shutdown protection
- Low quiescent current
- Fast transient response
Advantages and Disadvantages
Advantages
- Small form factor
- Wide input voltage range
- Efficient power conversion
- Overcurrent and thermal protection
Disadvantages
- Limited maximum output current
- Not suitable for high-power applications
Working Principles
XC6124E743MR-G operates by comparing the output voltage with a reference voltage and adjusting the internal circuitry to maintain a stable output voltage. It uses a feedback mechanism to continuously monitor and regulate the output voltage.
Detailed Application Field Plans
XC6124E743MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6124E743MR-G are: - XC6206P332MR - XC6220B332MR - XC6219B332MR - XC6221B332MR - XC6223B332MR
These models offer similar functionality and characteristics, providing options for different design requirements.
In conclusion, XC6124E743MR-G is a compact voltage regulator with a wide input voltage range and efficient power conversion. It offers overcurrent and thermal protection, making it suitable for various electronic devices. However, its limited maximum output current restricts its use in high-power applications.
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق XC6124E743MR-G في الحلول التقنية
Sure! Here are 10 common questions and answers related to the application of XC6124E743MR-G in technical solutions:
Q: What is XC6124E743MR-G? A: XC6124E743MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC6124E743MR-G? A: The operating voltage range of XC6124E743MR-G is typically between 0.8V and 6.0V.
Q: How does XC6124E743MR-G work? A: XC6124E743MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds a certain threshold, it triggers an output signal to indicate the status of the power supply.
Q: What is the output type of XC6124E743MR-G? A: XC6124E743MR-G has an open-drain output type, which means it can sink current but cannot source current. An external pull-up resistor is required to provide the output voltage level.
Q: What is the typical quiescent current consumption of XC6124E743MR-G? A: The typical quiescent current consumption of XC6124E743MR-G is very low, usually around 1.0µA.
Q: Can XC6124E743MR-G be used for undervoltage and overvoltage detection? A: Yes, XC6124E743MR-G can be used for both undervoltage and overvoltage detection. It has separate thresholds for each condition that can be set using external resistors.
Q: What is the typical accuracy of XC6124E743MR-G? A: The typical accuracy of XC6124E743MR-G is ±2% for both undervoltage and overvoltage detection thresholds.
Q: Can XC6124E743MR-G be used in battery-powered applications? A: Yes, XC6124E743MR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive devices.
Q: Does XC6124E743MR-G have any built-in hysteresis? A: Yes, XC6124E743MR-G has built-in hysteresis to prevent oscillation near the threshold voltage. The hysteresis width is typically around 100mV.
Q: What is the package type of XC6124E743MR-G? A: XC6124E743MR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.