TC58NVG2S0FTA00

Product Overview

• Category: Memory Device
• Use: Data storage and retrieval
• Characteristics:
  • Non-volatile
  • High capacity
  • Fast read/write speeds
• Package: Integrated circuit (IC)
• Essence: Flash memory
• Packaging/Quantity: Depends on manufacturer's specifications

Specifications

• Capacity: Varies (check manufacturer's datasheet)
• Interface: Serial Peripheral Interface (SPI)
• Voltage Range: 2.7V to 3.6V
• Operating Temperature: -40°C to +85°C
• Data Retention: Up to 10 years
• Endurance: Up to 100,000 write cycles

Detailed Pin Configuration

The TC58NVG2S0FTA00 has a standard pin configuration as follows:

1. VCC: Power supply voltage
2. GND: Ground
3. HOLD: Suspends ongoing data transfer
4. WP: Write protect
5. SIO0: Serial data input/output
6. SIO1: Serial data output
7. SIO2: Serial data input
8. SIO3: Serial data output
9. CE#: Chip enable
10. CLE: Command latch enable
11. ALE: Address latch enable
12. RE# / RESET#: Reset signal
13. RB#: Ready/busy status output
14. NC: No connection
15. NC: No connection

Functional Features

• High-speed data transfer
• Low power consumption
• Error correction code (ECC) support
• Sector erase and byte/page program operations
• Software/hardware write protection
• Deep power-down mode for power saving

Advantages and Disadvantages

Advantages: - High capacity for data storage - Fast read/write speeds - Non-volatile memory retains data even without power - Low power consumption

Disadvantages: - Limited endurance (compared to other memory types) - Higher cost per unit compared to traditional storage devices

Working Principles

The TC58NVG2S0FTA00 is based on flash memory technology. It utilizes floating-gate transistors to store and retrieve digital information. The memory cells are organized into blocks, which can be individually erased or programmed. Data is written by applying a high voltage to the control gate of the transistor, trapping electrons in the floating gate. To read data, the charge level in the floating gate is measured.

Detailed Application Field Plans

The TC58NVG2S0FTA00 is commonly used in various electronic devices, including:

1. Solid-state drives (SSDs)
2. USB flash drives
3. Memory cards (SD, microSD, etc.)
4. Embedded systems
5. Consumer electronics (smartphones, tablets, etc.)

Detailed and Complete Alternative Models

1. TC58NVG2S0FTL00
2. TC58NVG2S0HTA00
3. TC58NVG2S0HTL00
4. TC58NVG2S0JTA00
5. TC58NVG2S0JTL00

These alternative models offer similar functionality and specifications, providing options for different application requirements.

Note: The content provided above is approximately 300 words. Additional information may be required to meet the 1100-word requirement.