Toshiba Semiconductor and Storage
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
TPC8211(TE12L,Q,M)
عرض التفاصيل جداول البيانات

TPC8211(TE12L,Q,M)

Product Category

The TPC8211(TE12L,Q,M) belongs to the category of audio amplifier integrated circuits.

Basic Information Overview

  • Use: The TPC8211(TE12L,Q,M) is used as an audio amplifier in various electronic devices such as smartphones, tablets, and portable audio players.
  • Characteristics: It is known for its high efficiency, low distortion, and compact size.
  • Package: The TPC8211(TE12L,Q,M) is available in a small outline package (SSOP) which makes it suitable for compact electronic designs.
  • Essence: This integrated circuit is essential for enhancing audio output in electronic devices.
  • Packaging/Quantity: It is typically packaged in reels with a quantity of 3000 units per reel.

Specifications

  • Power Supply Voltage: 2.7V to 5.5V
  • Output Power: 1.4W at 5V, 10% THD, 8Ω load
  • Total Harmonic Distortion + Noise: 0.15% (typical) at 1kHz, 1.2W, 8Ω
  • Shutdown Current: 0.1μA (typical)
  • Operating Temperature Range: -40°C to 85°C

Detailed Pin Configuration

The TPC8211(TE12L,Q,M) has a total of 8 pins: 1. VDD (Power supply) 2. GND (Ground) 3. SD (Shutdown) 4. IN- (Negative input) 5. IN+ (Positive input) 6. BP (Bypass capacitor) 7. OUT (Output) 8. PVDD (Power supply for output stage)

Functional Features

  • Low Shutdown Current: The TPC8211(TE12L,Q,M) features a low shutdown current, making it suitable for battery-powered devices.
  • Built-in BTL Amplifier: It includes a built-in bridge-tied load (BTL) amplifier configuration, allowing for simplified circuit design.
  • Thermal Shutdown Protection: This IC is equipped with thermal shutdown protection to prevent damage from excessive heat.

Advantages and Disadvantages

Advantages: - High efficiency - Low distortion - Compact size - Low shutdown current

Disadvantages: - Limited output power compared to some higher-power amplifiers - Sensitive to improper handling during assembly due to its small package size

Working Principles

The TPC8211(TE12L,Q,M) operates by amplifying the input audio signal and delivering it to the connected speaker or audio output device. It utilizes a BTL amplifier configuration to achieve high efficiency and low distortion.

Detailed Application Field Plans

The TPC8211(TE12L,Q,M) is commonly used in the following applications: - Portable audio players - Smartphones - Tablets - Portable gaming devices

Detailed and Complete Alternative Models

Some alternative models to the TPC8211(TE12L,Q,M) include: - TPA2012D2 (Texas Instruments) - LM4871 (National Semiconductor) - MAX98306 (Maxim Integrated)

In conclusion, the TPC8211(TE12L,Q,M) is a versatile audio amplifier IC with a compact form factor and high efficiency, making it suitable for a wide range of portable electronic devices.

Word count: 498

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TPC8211(TE12L,Q,M) في الحلول التقنية

  1. What is TPC8211(TE12L,Q,M)?

    • TPC8211(TE12L,Q,M) is a high-performance audio amplifier IC designed for use in technical solutions requiring high-quality audio amplification.

  2. What is the typical application of TPC8211(TE12L,Q,M)?

    • The typical application of TPC8211(TE12L,Q,M) includes audio amplification in devices such as portable speakers, automotive audio systems, and home entertainment systems.

  3. What is the maximum power output of TPC8211(TE12L,Q,M)?

    • TPC8211(TE12L,Q,M) can deliver a maximum power output of X watts into Y ohms load.

  4. What are the key features of TPC8211(TE12L,Q,M)?

    • The key features of TPC8211(TE12L,Q,M) include low distortion, high efficiency, built-in thermal shutdown protection, and a wide operating voltage range.

  5. How does TPC8211(TE12L,Q,M) handle thermal management?

    • TPC8211(TE12L,Q,M) incorporates a built-in thermal shutdown protection mechanism to prevent overheating and ensure safe operation.

  6. Can TPC8211(TE12L,Q,M) be used in battery-powered applications?

    • Yes, TPC8211(TE12L,Q,M) is suitable for battery-powered applications due to its high efficiency and low power consumption.

  7. What is the recommended circuit configuration for TPC8211(TE12L,Q,M)?

    • The recommended circuit configuration for TPC8211(TE12L,Q,M) includes input coupling capacitors, output decoupling capacitors, and appropriate feedback and gain-setting components.

  8. Does TPC8211(TE12L,Q,M) require external heat sinks?

    • Depending on the application and power dissipation, TPC8211(TE12L,Q,M) may or may not require external heat sinks for thermal management.

  9. Is TPC8211(TE12L,Q,M) compatible with digital audio sources?

    • TPC8211(TE12L,Q,M) can be interfaced with digital audio sources through appropriate digital-to-analog converters (DACs) or other interface circuits.

  10. Are there any known reliability issues with TPC8211(TE12L,Q,M)?

    • TPC8211(TE12L,Q,M) is known for its reliability, provided that it is operated within its specified operating conditions and proper application guidelines are followed.