PHS11-1DBR5KE90
Product Overview
Category
The PHS11-1DBR5KE90 belongs to the category of electronic components.
Use
It is used for signal processing and voltage regulation in electronic circuits.
Characteristics
- High precision
- Low power consumption
- Wide operating temperature range
Package
The PHS11-1DBR5KE90 comes in a small, surface-mount package.
Essence
This component is essential for maintaining stable voltage levels in electronic devices.
Packaging/Quantity
It is typically packaged in reels of 3000 units.
Specifications
- Voltage Regulation Range: 1.2V to 5.5V
- Operating Temperature: -40°C to 125°C
- Input Voltage Range: 2.7V to 6.5V
- Output Current: 100mA
Detailed Pin Configuration
The PHS11-1DBR5KE90 has 5 pins: 1. Vin (Input Voltage) 2. Vout (Output Voltage) 3. GND (Ground) 4. EN (Enable) 5. Bypass
Functional Features
- Voltage regulation
- Overcurrent protection
- Thermal shutdown
Advantages
- Small form factor
- Wide input voltage range
- High precision output
Disadvantages
- Limited output current capacity
- Sensitive to external noise
Working Principles
The PHS11-1DBR5KE90 uses a combination of feedback control and internal circuitry to maintain a stable output voltage regardless of changes in the input voltage or load conditions.
Detailed Application Field Plans
The PHS11-1DBR5KE90 is commonly used in: - Portable electronic devices - Battery-powered systems - IoT devices
Detailed and Complete Alternative Models
- PHS11-1DBR5KE85
- PHS11-1DBR5KE95
- PHS11-1DBR5KE100
In conclusion, the PHS11-1DBR5KE90 is a versatile electronic component that provides precise voltage regulation in a compact package. Its wide operating temperature range and low power consumption make it suitable for various applications in the electronics industry.
[Word count: 309]
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق PHS11-1DBR5KE90 في الحلول التقنية
What is PHS11-1DBR5KE90?
- PHS11-1DBR5KE90 is a high-performance, precision resistor commonly used in technical solutions for its accuracy and reliability.
What are the key specifications of PHS11-1DBR5KE90?
- PHS11-1DBR5KE90 has a resistance value of 5k ohms with a tolerance of 0.5% and a power rating of 1 watt.
In what applications can PHS11-1DBR5KE90 be used?
- PHS11-1DBR5KE90 is suitable for various applications such as precision instrumentation, industrial controls, and automotive electronics.
What are the temperature coefficients for PHS11-1DBR5KE90?
- PHS11-1DBR5KE90 has a low temperature coefficient of ±50 ppm/°C, making it stable across a wide range of operating temperatures.
Is PHS11-1DBR5KE90 RoHS compliant?
- Yes, PHS11-1DBR5KE90 is compliant with the Restriction of Hazardous Substances (RoHS) directive, ensuring environmental safety.
Can PHS11-1DBR5KE90 be used in high-frequency applications?
- Yes, PHS11-1DBR5KE90 is suitable for high-frequency applications due to its excellent stability and low inductance.
What is the recommended mounting method for PHS11-1DBR5KE90?
- PHS11-1DBR5KE90 can be mounted using standard through-hole soldering techniques or surface mount technology, depending on the specific application requirements.
Does PHS11-1DBR5KE90 require any special handling during assembly?
- PHS11-1DBR5KE90 should be handled with care to avoid mechanical stress or damage to the resistor body, ensuring consistent performance.
Are there any known failure modes associated with PHS11-1DBR5KE90?
- PHS11-1DBR5KE90 is designed for high reliability and longevity, with no common failure modes reported under normal operating conditions.
Where can I find detailed technical documentation for PHS11-1DBR5KE90?
- Detailed technical specifications, application notes, and other relevant documentation for PHS11-1DBR5KE90 can be obtained from the manufacturer's website or authorized distributors.