Vishay BC Components
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
NTCLE100CL224JB0
عرض التفاصيل جداول البيانات

NTCLE100CL224JB0

Product Overview

Category

The NTCLE100CL224JB0 belongs to the category of thermistors.

Use

It is commonly used for temperature sensing and control applications.

Characteristics

  • High sensitivity to temperature changes
  • Wide operating temperature range
  • Small size for easy integration into electronic circuits

Package

The NTCLE100CL224JB0 is typically available in a small chip package.

Essence

This thermistor is essential for precise temperature measurement and regulation in various electronic devices and systems.

Packaging/Quantity

It is usually supplied in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Resistance: 220kΩ at 25°C
  • Tolerance: ±5%
  • Operating Temperature Range: -40°C to 125°C
  • Thermal Time Constant: 10s (max)

Detailed Pin Configuration

The NTCLE100CL224JB0 has two leads, with the resistance measured across these terminals. The pinout configuration is as follows: 1. Pin 1: Connects to one end of the thermistor 2. Pin 2: Connects to the other end of the thermistor

Functional Features

  • Non-linear resistance response to temperature changes
  • High precision in temperature measurement
  • Suitable for use in various temperature compensation and control circuits

Advantages

  • High sensitivity for accurate temperature monitoring
  • Wide operating temperature range for versatile applications
  • Compact size for easy integration into electronic designs

Disadvantages

  • Non-linear response may require additional calibration in some applications
  • Limited tolerance may necessitate tighter manufacturing controls for certain uses

Working Principles

The NTCLE100CL224JB0 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This characteristic allows it to be utilized for temperature measurement and control in electronic systems.

Detailed Application Field Plans

The NTCLE100CL224JB0 is widely employed in the following applications: - HVAC systems for temperature regulation - Consumer electronics for thermal management - Automotive industry for climate control systems - Industrial equipment for temperature monitoring and protection

Detailed and Complete Alternative Models

Some alternative models to the NTCLE100CL224JB0 include: - NTCLE100E3103JB0 - NTCLE100E3473JB0 - NTCLE100E3223JB0

In conclusion, the NTCLE100CL224JB0 thermistor offers high sensitivity and wide temperature range, making it suitable for diverse temperature sensing and control applications across various industries.

[Word count: 386]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق NTCLE100CL224JB0 في الحلول التقنية

  1. What is the NTCLE100CL224JB0 used for?

    • The NTCLE100CL224JB0 is a thermistor commonly used for temperature sensing and control in various technical solutions.

  2. What is the resistance value of NTCLE100CL224JB0 at 25°C?

    • The resistance value of NTCLE100CL224JB0 at 25°C is 220 kΩ.

  3. How does NTCLE100CL224JB0 behave with temperature changes?

    • NTCLE100CL224JB0 is a negative temperature coefficient (NTC) thermistor, meaning its resistance decreases as the temperature increases.

  4. What is the operating temperature range of NTCLE100CL224JB0?

    • The operating temperature range of NTCLE100CL224JB0 is typically from -55°C to 150°C.

  5. Can NTCLE100CL224JB0 be used for over-temperature protection?

    • Yes, NTCLE100CL224JB0 can be used for over-temperature protection due to its sensitivity to temperature changes.

  6. What are the typical applications of NTCLE100CL224JB0?

    • Typical applications of NTCLE100CL224JB0 include temperature measurement and compensation in automotive, industrial, and consumer electronic devices.

  7. Is NTCLE100CL224JB0 suitable for high-precision temperature measurements?

    • NTCLE100CL224JB0 is not typically used for high-precision temperature measurements due to its non-linear response.

  8. How should NTCLE100CL224JB0 be connected in a circuit?

    • NTCLE100CL224JB0 should be connected in series with a resistor in a voltage divider configuration to measure the temperature-dependent resistance.

  9. What are the key considerations when designing with NTCLE100CL224JB0?

    • Key considerations include self-heating effects, accuracy requirements, and calibration for specific temperature ranges.

  10. Can NTCLE100CL224JB0 be used in harsh environments?

    • NTCLE100CL224JB0 can be used in some harsh environments, but it's important to consider its limitations in extreme conditions such as high humidity or corrosive atmospheres.