NTCLE100E3123JB0
Product Overview
The NTCLE100E3123JB0 belongs to the category of thermistors and is commonly used for temperature sensing applications. This thermistor exhibits characteristics such as high sensitivity to temperature changes, small size, and a wide operating temperature range. It is typically packaged in a small, cylindrical form and is available in various packaging quantities to suit different application needs.
Specifications
- Resistance at 25°C: 12 kΩ
- Tolerance: ±5%
- Operating Temperature Range: -55°C to 150°C
- Maximum Power Rating: 125 mW
- Thermal Time Constant: 7 seconds
Detailed Pin Configuration
The NTCLE100E3123JB0 features two pins for connection, with no specific polarity requirements.
Functional Features
This thermistor provides accurate and reliable temperature measurements over a wide range, making it suitable for diverse industrial and consumer applications. Its high sensitivity ensures precise temperature detection, while its small size allows for integration into compact designs.
Advantages and Disadvantages
Advantages
- High sensitivity to temperature changes
- Wide operating temperature range
- Small form factor
Disadvantages
- Tolerance of ±5% may require calibration in some applications
- Limited maximum power rating
Working Principles
The NTCLE100E3123JB0 operates based on the principle of negative temperature coefficient (NTC), where its resistance decreases as the temperature increases. This characteristic enables it to accurately sense and respond to temperature variations within its specified range.
Detailed Application Field Plans
Industrial Applications
- Temperature monitoring and control in HVAC systems
- Thermal management in electronic devices
- Automotive climate control systems
Consumer Electronics
- Temperature measurement in home appliances
- Battery temperature monitoring in portable devices
Detailed and Complete Alternative Models
NTCLE100E3103JB0
- Resistance at 25°C: 10 kΩ
- Tolerance: ±3%
- Operating Temperature Range: -40°C to 125°C
NTCLE100E3223JB0
- Resistance at 25°C: 22 kΩ
- Tolerance: ±5%
- Operating Temperature Range: -50°C to 175°C
NTCLE100E3473JB0
- Resistance at 25°C: 47 kΩ
- Tolerance: ±5%
- Operating Temperature Range: -60°C to 200°C
In conclusion, the NTCLE100E3123JB0 thermistor offers high-performance temperature sensing capabilities suitable for a wide range of applications, despite its limitations in power handling and tolerance. Its compact design and reliable operation make it a popular choice for temperature measurement and control in both industrial and consumer electronics.
Word count: 386
قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق NTCLE100E3123JB0 في الحلول التقنية
What is the NTCLE100E3123JB0 used for?
- The NTCLE100E3123JB0 is a thermistor commonly used for temperature sensing and control in various technical solutions.
What is the operating temperature range of NTCLE100E3123JB0?
- The operating temperature range of NTCLE100E3123JB0 is typically -40°C to 125°C, making it suitable for a wide range of applications.
How does NTCLE100E3123JB0 function as a temperature sensor?
- NTCLE100E3123JB0 functions as a temperature sensor by exhibiting a change in resistance with temperature, allowing it to accurately measure and respond to changes in temperature.
What are the typical applications of NTCLE100E3123JB0 in technical solutions?
- NTCLE100E3123JB0 is commonly used in applications such as temperature monitoring and control in industrial equipment, HVAC systems, automotive electronics, and consumer appliances.
What is the resistance value of NTCLE100E3123JB0 at room temperature?
- At room temperature (25°C), the NTCLE100E3123JB0 typically has a resistance value of 12.3 kΩ.
How can NTCLE100E3123JB0 be integrated into a circuit for temperature measurement?
- NTCLE100E3123JB0 can be integrated into a voltage divider circuit or connected to a suitable measurement device to accurately measure and monitor temperature.
Does NTCLE100E3123JB0 require calibration for accurate temperature measurements?
- Yes, NTCLE100E3123JB0 may require calibration to ensure accurate temperature measurements, especially in critical applications.
What are the key considerations for designing a circuit using NTCLE100E3123JB0?
- Key considerations include selecting an appropriate biasing resistor, compensating for self-heating effects, and ensuring proper thermal coupling for accurate temperature sensing.
Can NTCLE100E3123JB0 be used for temperature compensation in electronic circuits?
- Yes, NTCLE100E3123JB0 can be utilized for temperature compensation in electronic circuits to maintain stable performance across varying temperatures.
Are there any specific precautions to be taken when handling NTCLE100E3123JB0 in technical solutions?
- Precautions include avoiding excessive mechanical stress, protecting against moisture and contaminants, and ensuring proper thermal management for reliable operation.