Vishay Dale
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
NTHS1012N01N1002KE
عرض التفاصيل جداول البيانات

NTHS1012N01N1002KE Encyclopedia Entry

Product Overview

  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High precision, low dropout voltage, low quiescent current
  • Package: SOT-23
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 10V
  • Output Voltage: 1.2V to 6V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 130mV at 100mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1 (VIN): Input Voltage
  • Pin 2 (GND): Ground
  • Pin 3 (VOUT): Output Voltage

Functional Features

  • Voltage Regulation: Maintains a stable output voltage despite fluctuations in the input voltage
  • Low Dropout: Works with very small voltage differentials between input and output
  • Low Quiescent Current: Minimizes power consumption in standby mode

Advantages

  • High Precision: Provides accurate and consistent output voltage
  • Small Package: SOT-23 package is compact and suitable for space-constrained applications
  • Low Power Consumption: Ideal for battery-powered devices

Disadvantages

  • Limited Output Current: Not suitable for high-power applications
  • Temperature Sensitivity: Performance may vary at extreme temperatures

Working Principles

The NTHS1012N01N1002KE uses a combination of internal circuitry and feedback mechanisms to regulate the output voltage based on the input voltage and load conditions. It adjusts the pass transistor to maintain a constant output voltage.

Detailed Application Field Plans

  • Portable Electronics: Suitable for smartphones, tablets, and wearable devices
  • Battery-Powered Devices: Ideal for IoT sensors, remote controls, and medical devices
  • Embedded Systems: Suitable for microcontroller-based systems and industrial automation

Detailed and Complete Alternative Models

  • LM1117: Similar voltage regulator with higher output current capability
  • XC6206: Low-power voltage regulator with ultra-small package

This comprehensive entry provides an in-depth understanding of the NTHS1012N01N1002KE, covering its specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.

[Word Count: 346]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق NTHS1012N01N1002KE في الحلول التقنية

  1. What is NTHS1012N01N1002KE?

    • NTHS1012N01N1002KE is a specific type of resistor commonly used in technical solutions.

  2. What are the key specifications of NTHS1012N01N1002KE?

    • The key specifications include its resistance value, power rating, tolerance, and temperature coefficient.

  3. How is NTHS1012N01N1002KE typically used in technical solutions?

    • NTHS1012N01N1002KE is often used to control the flow of electric current in various electronic circuits and devices.

  4. What are the advantages of using NTHS1012N01N1002KE in technical solutions?

    • Some advantages include its precision, reliability, and ability to withstand high temperatures.

  5. Are there any common applications for NTHS1012N01N1002KE?

    • Yes, NTHS1012N01N1002KE is commonly used in power supplies, amplifiers, and other electronic equipment.

  6. How do I select the right NTHS1012N01N1002KE for my technical solution?

    • Consider factors such as the required resistance value, power handling capability, and environmental conditions.

  7. Can NTHS1012N01N1002KE be used in high-frequency applications?

    • Yes, NTHS1012N01N1002KE can be suitable for high-frequency applications depending on its specific characteristics.

  8. What are the potential limitations of using NTHS1012N01N1002KE in technical solutions?

    • Limitations may include size constraints, cost, and potential heat dissipation issues.

  9. Are there any recommended best practices for integrating NTHS1012N01N1002KE into a technical solution?

    • It's important to follow manufacturer guidelines for proper installation and consider thermal management if necessary.

  10. Where can I source NTHS1012N01N1002KE for my technical project?

    • NTHS1012N01N1002KE can be sourced from electronic component distributors, manufacturers, or authorized retailers.