Vishay Semiconductor Diodes Division
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
MBR10H150CT-E3/45
عرض التفاصيل جداول البيانات

MBR10H150CT-E3/45

Introduction

The MBR10H150CT-E3/45 is a high-performance Schottky rectifier diode designed for various electronic applications. This entry provides an in-depth overview of the product, including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Product Overview

  • Category: Semiconductor/Electronic Component
  • Use: Rectification in power supply circuits, voltage clamping, and freewheeling diode applications
  • Characteristics: High current capability, low forward voltage drop, fast switching speed
  • Package: TO-220AB
  • Essence: High-efficiency rectification and voltage regulation
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies by supplier

Specifications

  • Voltage Rating: 150V
  • Current Rating: 10A
  • Forward Voltage Drop: Typically 0.75V at 5A
  • Reverse Leakage Current: Maximum 50µA at 150V
  • Operating Temperature Range: -65°C to +175°C
  • Storage Temperature Range: -65°C to +175°C

Detailed Pin Configuration

The MBR10H150CT-E3/45 has a standard TO-220AB package with three pins: 1. Pin 1: Anode (Positive terminal) 2. Pin 2: Cathode (Negative terminal) 3. Pin 3: Thermal pad (Connected to the metal tab for heat dissipation)

Functional Features

  • High current carrying capability
  • Low forward voltage drop for reduced power loss
  • Fast reverse recovery time for efficient switching

Advantages and Disadvantages

Advantages

  • High efficiency and reliability
  • Suitable for high-frequency applications
  • Compact and robust package design

Disadvantages

  • Higher cost compared to standard silicon diodes
  • Sensitive to voltage spikes and overcurrent conditions

Working Principles

The MBR10H150CT-E3/45 operates based on the Schottky barrier principle, where the metal-semiconductor junction allows for faster switching and lower forward voltage drop compared to conventional PN-junction diodes. When forward-biased, it conducts current with minimal voltage drop, making it ideal for high-frequency and high-efficiency applications.

Detailed Application Field Plans

The MBR10H150CT-E3/45 is commonly used in the following applications: - Switch-mode power supplies - DC-DC converters - Solar inverters - Motor drives - Uninterruptible power supplies (UPS)

Detailed and Complete Alternative Models

  • MBR10H150CT-E3/8: Similar specifications with different packaging
  • MBR10H150CT-E3/51: Higher voltage rating variant
  • MBR10H150CT-E3/73: Lower forward voltage drop variant

In conclusion, the MBR10H150CT-E3/45 is a high-performance Schottky rectifier diode with versatile applications in power electronics and voltage regulation. Its advanced characteristics and reliable performance make it a preferred choice for demanding electronic designs.

Word Count: 443

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق MBR10H150CT-E3/45 في الحلول التقنية

  1. What is the MBR10H150CT-E3/45 diode used for?

    • The MBR10H150CT-E3/45 diode is commonly used in power supply and rectification applications due to its high efficiency and low forward voltage drop.

  2. What are the key specifications of the MBR10H150CT-E3/45 diode?

    • The MBR10H150CT-E3/45 is a 150V, 10A Schottky diode with a low forward voltage drop and fast switching characteristics.

  3. Can the MBR10H150CT-E3/45 be used in high-frequency applications?

    • Yes, the MBR10H150CT-E3/45 diode is suitable for high-frequency applications due to its fast switching speed and low reverse recovery time.

  4. How does the MBR10H150CT-E3/45 diode compare to other similar diodes in terms of performance?

    • The MBR10H150CT-E3/45 offers superior efficiency and lower forward voltage drop compared to many standard diodes, making it ideal for power-sensitive applications.

  5. What are the typical applications of the MBR10H150CT-E3/45 diode?

    • Typical applications include switch-mode power supplies, freewheeling diodes, OR-ing diodes, and reverse battery protection circuits.

  6. Is the MBR10H150CT-E3/45 suitable for automotive applications?

    • Yes, the MBR10H150CT-E3/45 diode is often used in automotive electronics due to its rugged construction and high reliability.

  7. Does the MBR10H150CT-E3/45 require a heatsink for operation?

    • The need for a heatsink depends on the specific application and operating conditions. In high-power or continuous operation, a heatsink may be recommended.

  8. What are the temperature ratings for the MBR10H150CT-E3/45 diode?

    • The MBR10H150CT-E3/45 diode is typically rated for operation over a wide temperature range, with a maximum junction temperature specified by the manufacturer.

  9. Are there any common failure modes associated with the MBR10H150CT-E3/45 diode?

    • Common failure modes include thermal overstress, reverse voltage breakdown, and excessive current leading to junction damage.

  10. Where can I find detailed application notes and reference designs for using the MBR10H150CT-E3/45 diode in technical solutions?

    • Detailed application notes and reference designs can often be found in the datasheet provided by the manufacturer, as well as in application-specific technical literature and online resources.