Vishay Semiconductor Diodes Division
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
P6SMB10A-E3/5B
عرض التفاصيل جداول البيانات

P6SMB10A-E3/5B

Product Overview

Category

The P6SMB10A-E3/5B belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is used to protect sensitive electronic components from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

Characteristics

  • Fast response time
  • Low clamping voltage
  • High surge current capability
  • RoHS compliant

Package

The P6SMB10A-E3/5B is available in a DO-214AA (SMB) package.

Essence

The essence of this product lies in its ability to divert excessive current away from sensitive components, thereby safeguarding them from damage due to voltage spikes.

Packaging/Quantity

The P6SMB10A-E3/5B is typically packaged in reels with a quantity of 3000 units per reel.

Specifications

  • Standoff Voltage: 8.55V
  • Breakdown Voltage: 9.5V
  • Maximum Clamping Voltage: 15.6V
  • Peak Pulse Current: 43.5A
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

The P6SMB10A-E3/5B has two pins: 1. Anode (A) 2. Cathode (K)

Functional Features

  • Bi-directional TVS diode
  • Low incremental surge resistance
  • High temperature stability

Advantages

  • Provides robust protection against voltage surges
  • Fast response time ensures minimal impact on the protected circuit
  • Wide operating temperature range allows for versatile application

Disadvantages

  • May exhibit leakage current at lower voltages
  • Sensitive to reverse bias conditions

Working Principles

When a voltage surge occurs, the P6SMB10A-E3/5B conducts excess current to ground, limiting the voltage across the protected circuit.

Detailed Application Field Plans

The P6SMB10A-E3/5B is commonly used in: - Telecommunication equipment - Industrial control systems - Automotive electronics - Power supplies

Detailed and Complete Alternative Models

  • P6SMB6.8A-E3/52
  • P6SMB15A-E3/52
  • P6SMB33A-E3/52

In conclusion, the P6SMB10A-E3/5B is a vital component in protecting electronic circuits from voltage transients, offering fast response and high surge current capability. Its wide application field and availability of alternative models make it a versatile choice for circuit protection.

[Word count: 366]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق P6SMB10A-E3/5B في الحلول التقنية

  1. What is the maximum peak pulse power of P6SMB10A-E3/5B?

    • The maximum peak pulse power is 600 watts for a 10/1000μs waveform.

  2. What is the breakdown voltage of P6SMB10A-E3/5B?

    • The breakdown voltage is 10 volts.

  3. What is the typical clamping voltage of P6SMB10A-E3/5B?

    • The typical clamping voltage is 17.0 volts at 9.2A.

  4. What is the operating temperature range for P6SMB10A-E3/5B?

    • The operating temperature range is -55°C to +150°C.

  5. What is the package type of P6SMB10A-E3/5B?

    • The package type is DO-214AA (SMB).

  6. What are the applications of P6SMB10A-E3/5B?

    • P6SMB10A-E3/5B is commonly used in surge protection for sensitive electronics, such as telecommunications equipment, industrial control systems, and consumer electronics.

  7. What is the reverse stand-off voltage of P6SMB10A-E3/5B?

    • The reverse stand-off voltage is 8.55 volts.

  8. What is the peak pulse current rating of P6SMB10A-E3/5B?

    • The peak pulse current rating is 19.2A.

  9. Is P6SMB10A-E3/5B RoHS compliant?

    • Yes, P6SMB10A-E3/5B is RoHS compliant.

  10. What are the key features of P6SMB10A-E3/5B?

    • Some key features include low incremental surge resistance, fast response time, and high reliability.