Vishay Semiconductor Diodes Division
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
P6SMB36A-M3/52
عرض التفاصيل جداول البيانات

P6SMB36A-M3/52

Product Overview

Category

The P6SMB36A-M3/52 belongs to the category of transient voltage suppressor (TVS) diodes.

Use

It is used for protecting sensitive electronic devices from voltage transients induced by lightning, inductive load switching, and electrostatic discharge.

Characteristics

  • Fast response time
  • Low clamping voltage
  • High surge current capability

Package

The P6SMB36A-M3/52 is available in a DO-214AA (SMB) package.

Essence

The essence of this product lies in its ability to divert excessive current away from sensitive components, thereby safeguarding them from damage.

Packaging/Quantity

The P6SMB36A-M3/52 is typically packaged in reels with quantities varying based on manufacturer specifications.

Specifications

  • Standoff Voltage: 30.8V
  • Breakdown Voltage: 34.2V
  • Maximum Clamping Voltage: 49.9V
  • Peak Pulse Current: 53.5A
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The P6SMB36A-M3/52 typically has two pins, with the anode connected to the positive side and the cathode connected to the negative side of the circuit.

Functional Features

  • Transient voltage suppression
  • Bi-directional clamping
  • Low leakage current

Advantages and Disadvantages

Advantages

  • Effective protection against voltage transients
  • Fast response time
  • Compact size

Disadvantages

  • Limited surge current handling capacity compared to higher-rated TVS diodes
  • Higher clamping voltage than some specialized TVS diodes

Working Principles

When a voltage transient occurs, the P6SMB36A-M3/52 conducts excess current to ground, limiting the voltage across the protected circuit.

Detailed Application Field Plans

The P6SMB36A-M3/52 is commonly used in: - Telecommunication equipment - Automotive electronics - Industrial control systems - Power supplies

Detailed and Complete Alternative Models

  • P6SMB6.8A-M3/52
  • P6SMB10A-M3/52
  • P6SMB15A-M3/52
  • P6SMB24A-M3/52

In conclusion, the P6SMB36A-M3/52 is a crucial component in safeguarding electronic circuits from voltage transients, offering fast response and effective protection. Its compact size and bi-directional clamping make it suitable for various applications, although it may have limitations in handling extremely high surge currents. Alternative models are available to cater to different voltage protection requirements.

[Word count: 413]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق P6SMB36A-M3/52 في الحلول التقنية

  1. What is the maximum peak pulse power dissipation of P6SMB36A-M3/52?

    • The maximum peak pulse power dissipation of P6SMB36A-M3/52 is 600 watts.

  2. What is the breakdown voltage of P6SMB36A-M3/52?

    • The breakdown voltage of P6SMB36A-M3/52 is 36 volts.

  3. What is the typical clamping voltage of P6SMB36A-M3/52?

    • The typical clamping voltage of P6SMB36A-M3/52 is 58.1 volts at 10A.

  4. What is the operating temperature range of P6SMB36A-M3/52?

    • The operating temperature range of P6SMB36A-M3/52 is -55°C to +150°C.

  5. What is the package type of P6SMB36A-M3/52?

    • P6SMB36A-M3/52 comes in a DO-214AA (SMB) package.

  6. What are the typical applications for P6SMB36A-M3/52?

    • P6SMB36A-M3/52 is commonly used in transient voltage suppression for various electronic equipment and systems.

  7. What is the reverse stand-off voltage of P6SMB36A-M3/52?

    • The reverse stand-off voltage of P6SMB36A-M3/52 is 36 volts.

  8. What is the peak pulse current capability of P6SMB36A-M3/52?

    • P6SMB36A-M3/52 has a peak pulse current capability of 164.0A.

  9. What is the response time of P6SMB36A-M3/52 in suppressing transients?

    • The response time of P6SMB36A-M3/52 in suppressing transients is very fast, typically in picoseconds.

  10. Is P6SMB36A-M3/52 RoHS compliant?

    • Yes, P6SMB36A-M3/52 is RoHS compliant, making it suitable for use in environmentally conscious designs.