قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
TSSP77P38TT

TSSP77P38TT Infrared Sensor Module

Overview

The TSSP77P38TT is an infrared sensor module designed for various applications. This module falls under the category of electronic components and is commonly used in consumer electronics, industrial automation, and security systems. Its characteristics include high sensitivity, low power consumption, and a compact package. The essence of this module lies in its ability to detect infrared signals and convert them into electrical signals. It is typically packaged individually and is available in varying quantities based on the manufacturer's specifications.

Specifications

  • Operating Voltage: 2.5V to 5.5V
  • Carrier Frequency: 38kHz
  • Supply Current: 350µA
  • Transmission Range: Up to 45 meters
  • Package Type: Through Hole
  • Package Dimensions: 7.8mm x 6.95mm x 3.85mm

Detailed Pin Configuration

The TSSP77P38TT module consists of three pins: 1. VCC (Voltage Input) 2. GND (Ground) 3. OUT (Output Signal)

Functional Features

  • High Sensitivity: Capable of detecting weak infrared signals.
  • Low Power Consumption: Ideal for battery-operated devices.
  • Wide Transmission Range: Can detect signals from up to 45 meters away.

Advantages and Disadvantages

Advantages

  • Reliable detection of infrared signals
  • Low power consumption
  • Compact design

Disadvantages

  • Limited carrier frequency compatibility
  • Susceptible to interference from ambient light sources

Working Principles

The TSSP77P38TT operates by receiving infrared signals through its receiver diode. When an infrared signal is detected, the module converts it into an electrical signal, which can be further processed by the connected circuitry.

Detailed Application Field Plans

Consumer Electronics

  • Remote controls
  • Smart home devices
  • Presence detection systems

Industrial Automation

  • Proximity sensors
  • Object detection systems
  • Automated machinery control

Security Systems

  • Motion detection sensors
  • Intrusion detection systems
  • Surveillance cameras

Detailed and Complete Alternative Models

  1. TSOP38238 - Similar specifications with a different package type
  2. TSSP4038 - Higher transmission range with similar operating voltage

In conclusion, the TSSP77P38TT infrared sensor module offers reliable infrared signal detection with low power consumption, making it suitable for a wide range of applications in consumer electronics, industrial automation, and security systems.

Word Count: 386

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق TSSP77P38TT في الحلول التقنية

  1. What is TSSP77P38TT?

    • TSSP77P38TT is an infrared sensor module commonly used for remote control applications.
  2. How does TSSP77P38TT work?

    • TSSP77P38TT detects infrared signals from a remote control and converts them into electrical signals that can be processed by a microcontroller or other electronic devices.
  3. What are the typical applications of TSSP77P38TT?

    • TSSP77P38TT is commonly used in consumer electronics such as TVs, air conditioners, and audio systems for remote control functionality.
  4. What is the operating voltage range of TSSP77P38TT?

    • The operating voltage range of TSSP77P38TT is typically between 2.5V to 5.5V.
  5. What is the detection range of TSSP77P38TT?

    • TSSP77P38TT has a typical detection range of around 45 meters.
  6. Can TSSP77P38TT be used in outdoor applications?

    • TSSP77P38TT is primarily designed for indoor use and may not perform optimally in outdoor environments due to interference from sunlight and other sources of infrared radiation.
  7. Does TSSP77P38TT require any external components for operation?

    • TSSP77P38TT typically requires minimal external components such as a resistor and capacitor for proper operation.
  8. Is TSSP77P38TT compatible with common microcontrollers?

    • Yes, TSSP77P38TT is compatible with most microcontrollers and can be easily integrated into various technical solutions.
  9. What is the typical response time of TSSP77P38TT?

    • The typical response time of TSSP77P38TT is around 30 microseconds.
  10. Are there any special considerations for PCB layout when using TSSP77P38TT?

    • It is recommended to follow the manufacturer's guidelines for PCB layout to minimize interference and ensure optimal performance of TSSP77P38TT.