WeEn Semiconductors
قد تكون الصورة تمثيلية.
راجع المواصفات للحصول على تفاصيل المنتج.
BT151X-500R,127
عرض التفاصيل جداول البيانات

BT151X-500R,127

Product Category: Semiconductor Devices

Basic Information Overview: - Category: Thyristor - Use: BT151X-500R,127 is used as a switching device in various electronic circuits and power control applications. - Characteristics: This thyristor has high surge current capability, low holding current, and is designed for high temperature operation. - Package: The BT151X-500R,127 comes in a TO-220AB package. - Essence: It is essential for controlling power in electronic circuits and devices. - Packaging/Quantity: Typically packaged in reels of 500 units.

Specifications: - Voltage - Off State: 500V - Current - On State (It (RMS)): 12A - Voltage - Gate Trigger (Vgt) (Max): 1.5V - Current - Non Rep. Surge 50, 60Hz (Itsm): 125A - Operating Temperature: -40°C ~ 125°C

Detailed Pin Configuration: The BT151X-500R,127 has a standard TO-220AB pin configuration with the following pins: 1. Anode 2. Gate 3. Cathode

Functional Features: - High surge current capability - Low holding current - High temperature operation capability

Advantages and Disadvantages: - Advantages: - High surge current capability makes it suitable for demanding applications. - Low holding current reduces power dissipation. - Disadvantages: - Sensitive to voltage transients and overvoltage conditions.

Working Principles: The BT151X-500R,127 operates as a bistable semiconductor switch, conducting when triggered and remaining in the on-state until the current drops below a certain threshold.

Detailed Application Field Plans: - Power control in industrial equipment - Motor control in appliances - Lighting control in dimmer circuits

Detailed and Complete Alternative Models: - BT151-500R - BT151X-600R,127 - BT152X-500R,127

This comprehensive entry provides an in-depth understanding of the BT151X-500R,127 thyristor, covering its specifications, features, application, and alternatives.

[Word Count: 366]

قم بإدراج 10 أسئلة وإجابات شائعة تتعلق بتطبيق BT151X-500R,127 في الحلول التقنية

  1. What is the maximum voltage rating of BT151X-500R,127?

    • The maximum voltage rating of BT151X-500R,127 is 500 volts.

  2. What is the maximum current rating of BT151X-500R,127?

    • The maximum current rating of BT151X-500R,127 is typically 12A.

  3. What is the recommended operating temperature range for BT151X-500R,127?

    • The recommended operating temperature range for BT151X-500R,127 is -40°C to 125°C.

  4. Can BT151X-500R,127 be used for AC or DC applications?

    • Yes, BT151X-500R,127 can be used for both AC and DC applications.

  5. What are the typical applications for BT151X-500R,127?

    • BT151X-500R,127 is commonly used in light dimming, motor control, and heating control applications.

  6. Does BT151X-500R,127 require a heat sink for proper operation?

    • It is recommended to use a heat sink for BT151X-500R,127 when operating at high currents or in high ambient temperatures.

  7. What is the gate trigger voltage for BT151X-500R,127?

    • The gate trigger voltage for BT151X-500R,127 is typically around 1.5V.

  8. Is BT151X-500R,127 suitable for high-frequency switching applications?

    • No, BT151X-500R,127 is not suitable for high-frequency switching due to its relatively slow turn-off time.

  9. What are the key differences between BT151X-500R,127 and similar thyristors?

    • BT151X-500R,127 offers a higher voltage rating compared to many similar thyristors, making it suitable for a wider range of applications.

  10. Are there any specific safety considerations when using BT151X-500R,127?

    • Users should follow proper handling and insulation techniques to prevent electrical hazards, especially when working with high voltages.