RTC clock synchronization buffer driver delay chip
HGSEMI (Huaguan)
الشركات المصنعة
89467 PCS
في الأوراق المالية
RENESAS (Renesas)/IDT
الشركات المصنعة
I2C interface (RTC), working voltage: 2.7V-5.5V
وصف
68578 PCS
في الأوراق المالية
ADI (Adeno)
الشركات المصنعة
53511 PCS
في الأوراق المالية
TI (Texas Instruments)
الشركات المصنعة
82034 PCS
في الأوراق المالية
onsemi (Ansemi)
الشركات المصنعة
99581 PCS
في الأوراق المالية
TI (Texas Instruments)
الشركات المصنعة
CMOS Programmable Timer 16-PDIP -55 to 125
وصف
72289 PCS
في الأوراق المالية
ST (STMicroelectronics)
الشركات المصنعة
68526 PCS
في الأوراق المالية
ADI (Adeno)/MAXIM (Maxim)
الشركات المصنعة
I2C, 2-wire serial port
وصف
66681 PCS
في الأوراق المالية
RENESAS (Renesas)/IDT
الشركات المصنعة
58809 PCS
في الأوراق المالية
HTCSEMI (Haitian core)
الشركات المصنعة
87195 PCS
في الأوراق المالية
onsemi (Ansemi)
الشركات المصنعة
The NB100LVEP221 is a low-skew 2:1:20 differential driver for clock distribution, accepting two clock sources into one input multiplexer. The two clock inputs are differential ECL/PECL; CLK1/CLK1bar can also accept HSTL signal levels. The LVPECL input signal can be differential or single-ended (if using the VBB output). The LVEP221 specifically guarantees low output-to-output skew. Excellent design, layout, and handling techniques minimize skew within the device and from device to device. To ensure the tightest skew, both sides of the differential output are equally terminated to 50Ω, even if only one side is used. If an output pair is not used, both outputs can be left open (unterminated) without affecting the skew ratio. Like most other ECL devices, the NB100LVEP221 can be powered from a positive VCC supply in LVPECL mode. Therefore, using the LVEP221 in +3.3 V or +2.5 V systems enables high performance clock distribution. In a PECL environment, serial or Thevenin line terminations are often used because they do not require an additional power supply. Designers should refer to application note AND8020/D for more information on using PECL termination. Only the VBB pin, the internally generated supply voltage, is provided for this device. In the case of single-ended LVPECL inputs, tie the unused differential input to VBB as the switch reference voltage. VBB can also re-bias the AC-coupled input. When used, decouple VBB and VCC through a 0.01 uF capacitor and limit current to source or sink 0.5 mA. VBB should be left open when not in use. Single-ended CLK input operation is limited to VCC >= 3.0 V in LVPECL mode and VEE <= -3.0 V in NECL mode.
وصف
81651 PCS
في الأوراق المالية
TI (Texas Instruments)
الشركات المصنعة
53050 PCS
في الأوراق المالية
DIODES (US and Taiwan)
الشركات المصنعة
58539 PCS
في الأوراق المالية
ADI (Adeno)/MAXIM (Maxim)
الشركات المصنعة
77621 PCS
في الأوراق المالية
TI (Texas Instruments)
الشركات المصنعة
CDCM9102 Low Noise Dual Channel 100MHz PCIe Clock Generator
وصف
50126 PCS
في الأوراق المالية
HGC (Shenzhen Hanxin)
الشركات المصنعة
56287 PCS
في الأوراق المالية
HTCSEMI (Haitian core)
الشركات المصنعة
Micro-power real-time clock with 56 Х 8 RAM serial interface, supports oscillator operation in battery mode
وصف
89244 PCS
في الأوراق المالية
Micro Crystal (Swiss Micro Crystal)
الشركات المصنعة
58193 PCS
في الأوراق المالية
MICROCHIP (US Microchip)
الشركات المصنعة
85447 PCS
في الأوراق المالية
ADI (Adeno)/MAXIM (Maxim)
الشركات المصنعة
53809 PCS
في الأوراق المالية